NissanDiesel forums

Nissan diesel engines, and the people who love them
It is currently Sat Jul 22, 2017 10:06 am

All times are UTC - 8 hours [ DST ]




Post new topic Reply to topic  [ 2 posts ] 
Author Message
 Post subject: blowby test
Post Number:#1  PostPosted: Thu Feb 04, 2016 1:29 pm 
Offline

Joined: Thu Feb 04, 2016 1:13 pm
Posts: 1
I am looking at a 78 Scout diesel, non turbo SD33, and I have a question about checking the engine condition. I know the mercedes OM617 diesels you can take off the oil fill cap and check blowby, if theres lots of smoke or oil spitting, and the second test: resting the cap over the opening and if it is able to sit on it without flying off its ok. Just wondering if I could do the same tests on the SD33? And is there any other simple tests? Im going to be flying to another state to buy it, and the owner has agreed to do any simple tests I tell them. Any input or suggestions welcome.


Top
 Profile  
Reply with quote  
 Post subject: Re: blowby test
Post Number:#2  PostPosted: Thu Feb 04, 2016 5:03 pm 
Offline

Joined: Fri Aug 31, 2007 6:49 am
Posts: 792
Location: Cochrane Alberta Canada
Yes you can do that blow by test on it as well, but a better test would be to try and start it when it's cold.
Not just sitting for a couple hours after running, but a good overnight cold soak and see if it wants to start.
I would impart that request to the present owner that you want to start it from cold and put your hand on the block when you get there to see that it has not been running.

Short of doing a compression test through one of the glow plug holes those are about all you can do really.
Snap on makes a compression tester that works in that way.
You can search this forum under 33 series or the SD 22 engines for the compression numbers.
They will be the same for both.

I believe our main administrator/moderator Al Savage used to have one that he would lend out, with a deposit of course, and, you may want to reach out to him to see if he still has it and still lends it.

A PM to him would work best for that inquiry as he does not get on here too often.

Not sure where you are located but Al is in Washington State.
Good luck and let us know how you make out.

Paul

_________________
Retired Pauly
Problem with being retired is that you never get a day off.
1987 D21-J SD25 KC
KJLGD21FN


Top
 Profile  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 2 posts ] 

All times are UTC - 8 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group