NissanDiesel forums

Nissan diesel engines, and the people who love them
It is currently Thu Aug 24, 2017 3:42 am

All times are UTC - 8 hours [ DST ]




Post new topic Reply to topic  [ 3 posts ] 
Author Message
Post Number:#1  PostPosted: Thu Jul 11, 2013 2:12 am 
Offline

Joined: Thu Jul 11, 2013 1:22 am
Posts: 1
So this motor gets a rebuild at 125000km. New head,crank,injector pump, turbo.This was a pro rebuild. The car now has 162000km on it and i've just blown the 4th turbo. Always the front seals first followed by oil injestion and finally BANG if it gets that far. The GU has a crazy setup with the feeds from the bottom but this crap only started since the rebuild. Always replaced with the designed part, believe it's a T25 3bolt flange specific to the GU.
It has a Motsons fuel chip installed and the workshop put a boost controller in set to 15psi. My oil pressure is 37 psi@2500rpm. I dont have a fuel pick up pump installed as has been suggested. Other than 23/4 exhaust and turbo timer it's standard.
So WTF is happening. I got no hair left to pull out[/quote]


Top
 Profile  
Reply with quote  
 Post subject:
Post Number:#2  PostPosted: Fri Jul 12, 2013 11:35 am 
Offline
Site Admin
User avatar

Joined: Sat Nov 26, 2005 7:28 am
Posts: 5283
Location: Duvall, Wash.
I know nothing about the RD series, but generically . . . a restriction on the turbo oil return line would fit your description of the turbo seal failure.

_________________
Regards,
Al S.

1982 Maxima diesel wagon, 2nd & 4th owner, 165k miles, rusty & burgundy/grey. Purchased 1996, SOLD 16Feb10
1983 Maxima diesel wagon, 199k miles, rusty, light yellow/light brown. SOLD 14Jul07
1981 720 SD22 (scrapped 04Sep07)
1983 Sentra CD17, 255k, bought 06Jul08, gave it away 22Jun10.


Top
 Profile  
Reply with quote  
 Post subject:
Post Number:#3  PostPosted: Sun Jul 14, 2013 4:56 am 
Offline

Joined: Thu Feb 09, 2006 3:51 am
Posts: 525
Location: Karuah Valley,NSW Australia
oil breater in the rocker cover??blow by valve.

seal failure was common with the first RD28T.non electronic type without intercooler.and not every 10K.I think they are KKK not garrets.
get some good advice from early users.

too much back pressure--oil and exhaust.

restricted intake.GU has intercooler?rubber hoses.

cavitation in the oil supply-II had a transit van that had a blown headgasket into the turbo oil feed pipe gallery.the frothed up oil would bypass the seals and fill the exhaust.

_________________
WCJR31 Skyline.3.0 manual.wagon
R31 SKYLINE/Passage GT/PINTARA
LPG Ford Falcon 99-06 93 Disco
Local Shire Southern Zone Mechanic.


Top
 Profile  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 3 posts ] 

All times are UTC - 8 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group