source for engine pistons liners etc

SD diesels were widely available in the US in the 1981-86 Datsun/Nissan 720 pickups, and in Canada through '87 in the D21 pickup.

Moderators: plenzen, Nissan_Ranger

Post Reply
jevans
Posts: 13
Joined: 11 years ago
Location: Sooke British Columbia Canada

source for engine pistons liners etc

#1

Post by jevans »

I recently rebuilt my sd22. I put cam bearings, main and rod bearings. I reused my old pistons but put new rings and liners. Everything was std and in relatively good shape except the liners seemed excessively worn. I searched high and low for the liners and found them difficult to hunt down. Nissan had the liners and many of the parts I needed but the liners were 250$ cdn each liner. I got them and all the other parts I needed from Trupar.com. It's a forklift supplier. I used nissanpartsdeal.com (lists the parts but told me they are unavailable)to find the Nissan part numbers and entered those numbers into the Trupar website. I ordered them and they came within a few days. The liners pressed in easily and all the other parts worked well. Many of the sources mentioned on this site are old so I thought I would refresh the topic.
plenzen
Posts: 891
Joined: 16 years ago
Location: Cochrane Alberta Canada

Re: source for engine pistons liners etc

#2

Post by plenzen »

Thanks for updating with a new supplier.
Retired Pauly
Problem with being retired is that you never get a day off.
1987 D21-J SD25 KC
KJLGD21FN
Post Reply

Who is online

Users browsing this forum: No registered users and 10 guests