NissanDiesel Forum Index NissanDiesel
LD & SD series Nissan diesel engines, and the people who love them
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Mystery plate within injection pump

 
Post new topic   Reply to topic    NissanDiesel Forum Index -> SD3x vehicles
View previous topic :: View next topic  
Author Message
Tracteur Tom



Joined: 07 Sep 2008
Posts: 11
Location: France
PostPosted: Thu Nov 27, 2008 3:35 am    Post subject: Mystery plate within injection pump Reply with quote
I am in the process of fitting an in-line pump to my TD42 and I've hit a small problem. I removed the pump side cover to have a look and a baffle plate fell out. This plate is held in place with the fixing screws of the cover and seems to be there to control the oil, or to keep in flowing as required, or away from certain pieces, but I cannot figure out which way it should go back ! Its the length of the pump chamber and if you were to look at it end on (looking along the pump chamber) it has a right angled bend at the top (or is it the bottom ?) and 6 scalloped out semi circles that sit around each pump section - but is it the top or the bottom ? There are no witness marks to guide me and all attempts to look for a similar setup in parts lists etc fail.
The pump is a PE S6A of late 1980s vintage.

Help anyone ???

Cheers
TT
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    NissanDiesel Forum Index -> SD3x vehicles All times are GMT - 7 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group