WTB 81-84 Maxima CV axles

Buy it, sell it, negotiate, haggle, drag it out from under the workbench or behind the garage and make it someone else's problem!

Moderators: goglio704, glenlloyd, Nissan_Ranger, kassim503

Post Reply
San Maru
Posts: 4
Joined: 8 years ago
Location: East Atlanta

WTB 81-84 Maxima CV axles

#1

Post by San Maru » 8 years ago

Hi, I need CV axles for a 1981-1984 maxima. My email is roryleitner@yahoo.com or message me here. Thank you.

HowlerMonkey
Posts: 130
Joined: 14 years ago
Location: West Palm Beach Florida

#2

Post by HowlerMonkey » 8 years ago

I believe they will be the same for R180 equipped 280zx cars.

I converted my car to r200 and used the 280zx axles for a r200 280zx so the ultimate width of the diff. and axles is the same for both cars.......and it would also apply to the r180 cars.

San Maru
Posts: 4
Joined: 8 years ago
Location: East Atlanta

#3

Post by San Maru » 8 years ago

Thanks. I will look into that. The r200 weighs an extra 35 pounds and I dont desire add weight. The R180 zx use a universal joint on the axle and it bolted into the side gear button of their differential instead of the clip in maxima type. Which means to use the zx axles I would have to use the matching R180, and an adapter at the wheel end of the axle. Or tear into the differentials to swap some side gear parts, and Im not qualified to do that. Interesting to think about, but not very appealing. Thank you anyway.

Post Reply

Who is online

Users browsing this forum: Bing [Bot] and 2 guests