Hi just wondering if someone could tell me what the two water sensors are for?
I guess one is my water temperature gauge which isn't working at the moment and the other maybe to tell a glowplug controller how hot the motor is???
Thanks
Water sensors
Moderators: plenzen, glenlloyd, goglio704, Nissan_Ranger
-
- Posts: 893
- Joined: 16 years ago
- Location: Cochrane Alberta Canada
The one with the red wire is for engine temp. (Dash Guage)
The second one ( with the grey clip and the two wires) is a thermo resistor and based on the reading it gets it tells the glow system how long to fast burn the plugs based on coolant/eng. temp.
It would appear that someone has been messing with the harness there as one wire appears to be unplugged and one has had something grafted on to it.
Paul
The second one ( with the grey clip and the two wires) is a thermo resistor and based on the reading it gets it tells the glow system how long to fast burn the plugs based on coolant/eng. temp.
It would appear that someone has been messing with the harness there as one wire appears to be unplugged and one has had something grafted on to it.
Paul
Retired Pauly
Problem with being retired is that you never get a day off.
1987 D21-J SD25 KC
KJLGD21FN
Problem with being retired is that you never get a day off.
1987 D21-J SD25 KC
KJLGD21FN
Who is online
Users browsing this forum: No registered users and 0 guests