My welder killed my Vanette.

Other Nissan diesel engines and vehicles: TD/RD/YD/FD/UD etc.

Moderators: plenzen, Nissan_Ranger

Post Reply
Jirido
Posts: 2
Joined: 8 years ago

My welder killed my Vanette.

#1

Post by Jirido »

Hi. I'm new so i present my self. I'm David. I live in Finland on an old junk ship i have found blown up on the cliffs.
It has some work still before running. So I'm a bit stranded on a foreign shore so to say.

Image

Any way..
As my old Hanomag lost a wheel while driving and then got towed away before i had time to get it of the road, i got my self a Vanette cargo with a 2.3d engine.

It was a little rusty so i went on it. Stupidly i took of the positive lead instead of the negative... So baffle and amaze! Now i have fried some electronics in it's bowels.
The symptoms are that it wont glow. And do not start.

So i first wonder if someone have any kind of copy of a wiring diagram that can be applied. I guess it is the unidad control timer that is broke as the yellow cord that goes to the relay don't get any juice.
But it could also be some relay that feeds that unidad box. It has 12v on a green/yellow cord that is on the pin under thicker read one that does not have any juice.
Image

Or it could actually be anything in my mind as i don't know how deeply electronics integrate in this motor.

The solenoid on the pump has 12 - 12 - 9v while ignition is on.

Image

Also there is a second relay with 2 thick white cords to it, beside the "glow relay" that has one read and one white thick one.
Image

What is that one for? It dont seam to be for this..

Image

And should it be feed while driving or also just when glowing?

I also found a immobilizer and some other box beside it that is numbered 22605 0C800 572540..
Image
Image

Whats that and what should i expect from it? /Them?
can i remove the imobilizer while driving if the unidad id dead?

What all do i need to feed to manually override this so i can get around?

I understand this seems mighty confused and its true.

I know i could buy a handbook or pdf or such but I'm very short on money and will probably need the little that there are on spares, buss tickets and so on. Also i do not have any credit card you know :/

But on the bright side I have some understanding of electronics and the thumb comfortable on the side on my hand.

I will be very grateful for any advice or information. So ..

:shock: :shock: HELP!!! :shock: :shock:
Attachments
Whats_this.jpg
Whats_this.jpg (157.91 KiB) Viewed 3418 times
Unknown_soldier.JPG
Unknown_soldier.JPG (171.21 KiB) Viewed 3418 times
unidad.JPG
unidad.JPG (160.72 KiB) Viewed 3418 times
solenoid.jpg
solenoid.jpg (157.35 KiB) Viewed 3418 times
Ship.jpg
Ship.jpg (138.34 KiB) Viewed 3418 times
relays.JPG
relays.JPG (180.8 KiB) Viewed 3418 times
Immobiliser.JPG
Immobiliser.JPG (185.14 KiB) Viewed 3418 times
Jirido
Posts: 2
Joined: 8 years ago

Re: My welder killed my Vanette.

#2

Post by Jirido »

I'm an pure idiot. it was bad earting.
User avatar
asavage
Site Admin
Posts: 5431
Joined: 18 years ago
Location: Oak Harbor, Wash.
Contact:

Re: My welder killed my Vanette.

#3

Post by asavage »

Good pictures, though!
Regards,
Al S.

1982 Maxima diesel wagon, 2nd & 4th owner, 165k miles, rusty & burgundy/grey. Purchased 1996, SOLD 16Feb10
1983 Maxima diesel wagon, 199k miles, rusty, light yellow/light brown. SOLD 14Jul07
1981 720 SD22 (scrapped 04Sep07)
1983 Sentra CD17, 255k, bought 06Jul08, gave it away 22Jun10.
Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests