1971 521 diesel 4x4 build

This is where we can post about our rigs, specs, ongoing plans, etc., links to pics.

Moderators: goglio704, Nissan_Ranger

Post Reply
olderthanme
Posts: 32
Joined: 16 years ago
Location: Atlanta, GA 30078

1971 521 diesel 4x4 build

#1

Post by olderthanme »

So I picked up this 1971 521 that had been used as a parts truck, but was still quite complete as most of the hard to find parts are still on it.


Missing/Needed:
Grill
Grill surround trim
interior rear view mirror


Extra parts:
extra set of wheels with no hub caps

OICS:
as it sat when I picked it up:
Image

Slight damage to the Left front fender, but nothing too terrible or out of my ability to fix..
Image Image


at the shop:
Image Image

ZERO rust-through in the floors(but the left side body mounts are gone??)
Image Image Image


Plan is to paint the body/cab a strong deep red (free urethane paint) while the frame gets painted in epoxy primer and black.
Image




now there is a lot going on already for this truck....

81' 720 4x4 frame getting a Dana 44 up front and another full width axle(Ford 9" or another Dana 44 in the back). Currently in the middle of stripping the frame down to bare essentials before epoxy primer and mounting the new suspension.
Image

before the 7(spread out) days worth of work it took to get to the above photo:
Image
Floors were gone, damage on every fender from wreckless offroading by the previous owners, and 290,000 miles on the clock!
olderthanme
Posts: 32
Joined: 16 years ago
Location: Atlanta, GA 30078

#2

Post by olderthanme »

Finished cutting all the stuff off around the engine mounts/IFS area late last night...
Image


This morning came in and finished up a couple little spots and started laying Epoxy primer.
Image Image


Then I started laying color

Image Image


I still have to do all the front suspension mounting, but the majority of the chassis is done and will just have to do touchup on the areas to be welded.
rlaggren
Posts: 541
Joined: 17 years ago
Location: San Francisco

#3

Post by rlaggren »

You got the floors figured out?
82 Maxima wagon
olderthanme
Posts: 32
Joined: 16 years ago
Location: Atlanta, GA 30078

#4

Post by olderthanme »

rlaggren wrote:You got the floors figured out?
The floor mounting points are identical between 521/620/720 pickups
olderthanme
Posts: 32
Joined: 16 years ago
Location: Atlanta, GA 30078

#5

Post by olderthanme »

Mocking up the front 3 link setup on the Dana 44 axle.

Image Image
olderthanme
Posts: 32
Joined: 16 years ago
Location: Atlanta, GA 30078

#6

Post by olderthanme »

New~ish clutch. it was run for about 250 miles and was on the Z24 that was previously in the 81 4x4 truck, pressure plate still has the machining marks in it, so it should be good to go. Had to bend a finger straight since the previous owner bent it trying to get the transmission in.

Image

Painted the motor, then started bolting it all back together. (Oil pan will get painted silver when the engine doesn't have to sit on it any more)


Image Image Image Image
bogs777
Posts: 33
Joined: 13 years ago

#7

Post by bogs777 »

that was nice. hope i can have my engine painted that easy.
olderthanme
Posts: 32
Joined: 16 years ago
Location: Atlanta, GA 30078

#8

Post by olderthanme »

Made a little progress...
Got started on the panhard bar stuff, just waiting on the link tubing to come in.
Also positioned the engine so that I can build the engine mounts.

Image Image Image Image Image
olderthanme
Posts: 32
Joined: 16 years ago
Location: Atlanta, GA 30078

#9

Post by olderthanme »

Here are some pics from today:

I cut up the 521 bed on the donor truck(all rusty on the bed bottom)
Image

Mocking up the passenger side:
Image Image

Driver's side:
Image Image


Looks like I'm going to have to lengthen the stock wheel well openings... Still want to look somewhat original but I'm putting together a plan on how to go about opening them up and keep the look.

Image
scrapman1077
Posts: 15
Joined: 12 years ago

build

#10

Post by scrapman1077 »

Looking good ! Keep us posted.
olderthanme
Posts: 32
Joined: 16 years ago
Location: Atlanta, GA 30078

#11

Post by olderthanme »

Got some more work done today...

Worked on getting the right side mounted. The left side was removed(un-bolted from the locking hub) for reinforcement like what you see in these right side pics.

Nowherre near done yet but at least the bed side isn't going to collapse under its own weight.


Image Image Image Image
User avatar
asavage
Site Admin
Posts: 5431
Joined: 18 years ago
Location: Oak Harbor, Wash.
Contact:

#12

Post by asavage »

I wonder whatever became of this project.
Regards,
Al S.

1982 Maxima diesel wagon, 2nd & 4th owner, 165k miles, rusty & burgundy/grey. Purchased 1996, SOLD 16Feb10
1983 Maxima diesel wagon, 199k miles, rusty, light yellow/light brown. SOLD 14Jul07
1981 720 SD22 (scrapped 04Sep07)
1983 Sentra CD17, 255k, bought 06Jul08, gave it away 22Jun10.
waynosworld
Posts: 571
Joined: 11 years ago
Location: Vancouver Washington USA

#13

Post by waynosworld »

asavage wrote:I wonder whatever became of this project.
As life happens, things change, this build also changed, here is a link to the build, the SD22 diesel engine is actually in a Datsun roadster now.
https://www.google.com/url?q=http://com ... OL4kzqqCwg
This is not my rig, but I recognized the build.
I know the voices are not real,
but they have some really good ideas.
Post Reply

Who is online

Users browsing this forum: Ahrefs [Bot] and 10 guests