need sd33 fuel line

Buy it, sell it, negotiate, haggle, drag it out from under the workbench or behind the garage and make it someone else's problem!

Moderators: glenlloyd, goglio704, Nissan_Ranger, kassim503

Post Reply
rudolf diesel
Posts: 3
Joined: 13 years ago

need sd33 fuel line

#1

Post by rudolf diesel »

Looking to buy sd33 fuel injector line, does not matter which of the 6 lines, as I will be using it for my OTC injector tester. Please e-mail me at dcampb18@sbcglobal.net
Thanks
rlaggren
Posts: 541
Joined: 17 years ago
Location: San Francisco

#2

Post by rlaggren »

Might try brake lines.
82 Maxima wagon
rudolf diesel
Posts: 3
Joined: 13 years ago

#3

Post by rudolf diesel »

rlaggren wrote:Might try brake lines.
Thanks, but The end I need is a different shape than what is on brake lines. I also need the nuts on the line, they are 12mmx1.5 I believe.
dn29626
Posts: 249
Joined: 14 years ago
Location: Anderson, SC

#4

Post by dn29626 »

rudolf diesel

Are you the same guy with the vo/biodiesel place in Mauldin a few years ago?
82 King Cab 2wd (nice)
82 Reg Cab (body damage)
Anderson , SC
Since Fall 2009
rudolf diesel
Posts: 3
Joined: 13 years ago

#5

Post by rudolf diesel »

No, sorry, not the same guy.
rlaggren
Posts: 541
Joined: 17 years ago
Location: San Francisco

#6

Post by rlaggren »

> end fitting

Duh! <g> Well...

Maybe a hydraulic shop could fab the lines, bends and all. Not sure, never tried to find this stuff. It'd cost more than pre-formed, of course. Could try googling and see what services are out there; if anything turns up then see if somebody does it locally. An IP shop would probably do the job or know who could; probably cost more that way. Could help if you had the original in semi decent shape.

There's enough diesels around. Seems there must be a way to get a high pressure IP line made up. I bet the whole thing is just cut and worked cold.

Rufus
82 Maxima wagon
Post Reply

Who is online

Users browsing this forum: No registered users and 5 guests