replacement primer pump

SD diesels were widely available in the US in the 1981-86 Datsun/Nissan 720 pickups, and in Canada through '87 in the D21 pickup.

Moderators: plenzen, Nissan_Ranger

Post Reply
Driftwood
Posts: 22
Joined: 10 years ago
Location: Portland, OR

replacement primer pump

#1

Post by Driftwood »

Does anyone know the part number or where to order one of the newer primer pumps for a bosch-kikki inline type pump? The kind that you don't have to unscrew to prime?

I suspect I might be sucking air through the leaking old one.


Thanks!
charmalu
Posts: 166
Joined: 13 years ago
Location: Soquel, Calif

#2

Post by charmalu »

It`s a Bosch primer pump, they run around $20 depending where you source them. NAPA might have, or a VW performance shoP, the Diesel Rabbits probably used them.

These are a definite up grade over the one you have to unscrew. they eventually leak and suck air.

here is a listing.

http://www.pelicanparts.com/catalog/Sup ... .htm#item3


On this AZ site below, click on primer Pump.

http://www.autohausaz.com/search/group. ... id=22@Fuel

Do you have any PNP type Junk Yards> find a Mercedes Diesel in the 80`s and you most likely will find one on them.

Charlie
82 Datsun KC 483K lost #2 cyl blowing blue smoke :cry:
83 Nissan LB 134K SD-25 as of 10-21-13
78 240D Mercedes $300 Parts?
80 240D 360K
80 240D Parts? $750
82 240D Parts? $440
84 300SD 270K
85 300D 363K
86 Ford F250 6.9 Diesel 221K
Driftwood
Posts: 22
Joined: 10 years ago
Location: Portland, OR

#3

Post by Driftwood »

Thanks for your help Charlie, I'm going to try to source one now.
charmalu
Posts: 166
Joined: 13 years ago
Location: Soquel, Calif

#4

Post by charmalu »

You are welcome.

These two sites are not the only place to purchase them.
Do a Google search on either part # each site lists and there are other seller that offer them..

On the Peachparts site the offer an adaptor with the Pump it the threads are larger than the threads on the pump. you will not need the adaptor for the Nissan or the older MB Diesels.

Note: This brand has a 16 mm threaded fitting, and comes with a~22 mm adapter. Can be used for models with either a 16 or 22~mm receptacle on the fuel pump.

I have grabbed a few in the PNP yards when Iam in there.


Charlie
82 Datsun KC 483K lost #2 cyl blowing blue smoke :cry:
83 Nissan LB 134K SD-25 as of 10-21-13
78 240D Mercedes $300 Parts?
80 240D 360K
80 240D Parts? $750
82 240D Parts? $440
84 300SD 270K
85 300D 363K
86 Ford F250 6.9 Diesel 221K
Post Reply

Who is online

Users browsing this forum: Ahrefs [Bot] and 0 guests