LD28m - Heat Exchanger - Need Input
Moderators: plenzen, glenlloyd, goglio704, Nissan_Ranger
-
- Posts: 5
- Joined: 10 years ago
LD28m - Heat Exchanger - Need Input
The heat exchanger core blew out. Tried to repair, but it is too far gone I'm afraid. Any idea where I can get a new one or an alternative exchanger that I can substitute for the Nissan?
-
- Posts: 107
- Joined: 12 years ago
- Location: Peyton Colorado
Re: LD28m - Heat Exchanger - Need Input
When you refer to heat exchanger, are you refering to the American term of the "radiator"? If so, usually if you can plumb in a similar sized unit from any other application and it should work.
Duane
-
- Posts: 5
- Joined: 10 years ago
Re: LD28m - Heat Exchanger - Need Input
Thanks. Thays what I am understanding. So, im looking for one that will fit and ill be back in business.
-
- Posts: 893
- Joined: 16 years ago
- Location: Cochrane Alberta Canada
Re: LD28m - Heat Exchanger - Need Input
Maybe take some measurements and have a look here
http://www.plumbnation.co.uk/radiators.php
There are a number of different sites that list radiators by size etc. May not be an OEM rad but might get you close enough.
Good luck
Paul
http://www.plumbnation.co.uk/radiators.php
There are a number of different sites that list radiators by size etc. May not be an OEM rad but might get you close enough.
Good luck
Paul
Retired Pauly
Problem with being retired is that you never get a day off.
1987 D21-J SD25 KC
KJLGD21FN
Problem with being retired is that you never get a day off.
1987 D21-J SD25 KC
KJLGD21FN
-
- Posts: 5
- Joined: 10 years ago
Re: LD28m - Heat Exchanger - Need Input
Turns out I got one fabricated from Seakamp in Bellingham WA. For about $700
Who is online
Users browsing this forum: Bing [Bot] and 0 guests