Hi all,
Rear brakes are my next project & I want to change the axle seals at the same time.
Is there a thread that covers this somewhere?
Thanks,
Lonnie
Rear axle seals.
Moderators: plenzen, Nissan_Ranger
-
Lonnie
- Posts: 54
- Joined: 17 years ago
- Location: Oregon
-
asavage
- Site Admin
- Posts: 5433
- Joined: 18 years ago
- Location: Oak Harbor, Wash.
- Contact:
Strangely enough, I don't think so.
Refer to your FSM, RA section.
Refer to your FSM, RA section.
Regards,
Al S.
1982 Maxima diesel wagon, 2nd & 4th owner, 165k miles, rusty & burgundy/grey. Purchased 1996, SOLD 16Feb10
1983 Maxima diesel wagon, 199k miles, rusty, light yellow/light brown. SOLD 14Jul07
1981 720 SD22 (scrapped 04Sep07)
1983 Sentra CD17, 255k, bought 06Jul08, gave it away 22Jun10.
Al S.
1982 Maxima diesel wagon, 2nd & 4th owner, 165k miles, rusty & burgundy/grey. Purchased 1996, SOLD 16Feb10
1983 Maxima diesel wagon, 199k miles, rusty, light yellow/light brown. SOLD 14Jul07
1981 720 SD22 (scrapped 04Sep07)
1983 Sentra CD17, 255k, bought 06Jul08, gave it away 22Jun10.
-
ffdjm
- Posts: 18
- Joined: 18 years ago
- Location: Fairbanks, Alaska
On my 1981 720 there are two rear axle seals on each side, IIRC, on each side of the bearing. The outside one comes off easily. The inner one required a special tool to either remove or install, I can't recollect which. It was easy to make but I had a welder then. If you have oiled rear brakes both seals will need replacing. I did this years ago so do not tax me regarding the details.
Douglas
Douglas
Who is online
Users browsing this forum: No registered users and 5 guests