Now, things I know are wrong with it: 1) Broken transmission mount 2) Owner has previously broken a couple clutches, so I am thinking the crank bushing is shot, if it even has one, or there is an alignment or flywheel issue. The transmission does seem to be attached with an adapter of some kind. 3) When I reprimed the fuel system, the lift pump leaked pretty badly out the top every time I pushed the plunger down. 4) The key does not shut the engine down. We have to pull the lever on the governor to do that. 5) The front vacuum line on the governor was melted through and doesn't go to anything. From what I can find it was supposed to go to the air intake system? There may be more but that is all I can remember.
I have taken some photos and would appreciate any feedback on what you see. As this is my first time with this particular engine type, I am not sure if things look right or not. Also, I took pictures of the transmission markings, but could not identify the type of transmission by them, so help with that would be greatly appreciated as well.
And guys, just know you are helping with a good cause. This is the delivery vehicle for a local microbrewery here. Getting it running well will help many people enjoy good quality, tastey beer in a timely manner.
![Very Happy :D](./images/smilies/icon_biggrin.gif)
*** Getting the message "Temporary folder could not be found. Please check your PHP installation" when I try to upload the photos, so I will try to load them after this post.
Switched browsers and used a VPN. Still can't upload photos. Any ideas?