Lot of power on SD22

[Dale]

The diagram is rotated 180 degrees vs the picture, they are both correct.

[dn29626]

Thanks for the confirmation.

[fieldtech]

Ambon the process of turboing two sd22 engines. the turbo you
have does it boost good at low engine rpms?

[elboss]

yes you can see in video, i dont have rpm's, but maybe 1 or 2 seconds lag...

You can see it running in last sunday NOV, with a new reforced headgasket...

http://youtu.be/8SfaHaDGB7M

http://youtu.be/kfEchaVm704

[elboss]

I just want to say, the engine still alive!!! with About 8 hours running, oil temp - perfect, Headgasket - perfect! water - perfect!

Maybe tommorrow i add one video!

[rhino 660]

can you take another picture of your throttle setup and of your turbo setup
im in the process of removing the diaphragm fuel controll and am switching to your setup thanks boss

[elboss]

One more race, and she still alive! Run very very well!! see this!









http://youtu.be/7MPEuME3pJQ

http://youtu.be/ZOAjUU_HcRk

[elboss]

Hi buddy's! My engine still alive! the headgasket is good, the engine still sound very good! check in this video, the sound and the power of this engine http://youtu.be/qbGJCtBFZ3E

[dn29626]

What date did you install this current head gasket?
Please repeat the info on this good gasket, source, part number, any related info.

[elboss]

in december... i made 5 races, full day running, with 2 bar... the head gasket is "home made" by "Euro juntas" in portugal

[asavage]

Please repair the broken picture links in your posts at the beginning of this thread.

[elboss]

i think its done sorry!

[asavage]

There are still broken picture links in
this post
and
this post
and
this one

[elboss]

i dont know what photo is :/

Now i work to change the inline pump, to a zexel pump:



and maybe the next bi-turbo:

[asavage]

i dont know what photo is :/

Please do not post pictures that will only be viewable for less than twelve months.