Hello Forum!
I decided to post up my "New to me" rig in here. I know I am late to the party but I have been wanting this specific vehicle for 5 years. I also own a 1977 280Z (Which I will NOT be taking the V07 Crank).
I just finished doing the IP pump belt and tensioner, all the belts, coolant flush, and suspension refresh.
This car was originally a Austin Texas Car (currently I am in Houston). The mileage is 253k but the odometer is questionable and bouncy. I was informed that the LD28 in my wagon was replaced in 2011 with a NOS longblock (The engine serial isn't correct so I can see that)
The first owner definitely loved his maintenance as I was provided a box full of NOS stuff ( GP main relay, 3 GP resistors, fuel filter water sensor, 3 OD switched despite having a 82', and more misc)
Overall, I would love to do the L4N71B swap if I could even source the diesel one. I also plan on putting a tach in with the tach mod. I just want to keep this tank going for as long as I can!
My 1982 Nissan Maxima Diesel Wagon
Moderators: goglio704, Nissan_Ranger
- Kyle146
- Posts: 2
- Joined: 3 months ago
My 1982 Nissan Maxima Diesel Wagon
- Attachments
-
- IMG_20250331_065836.jpg (2.14 MiB) Viewed 2571 times
-
- IMG_20250419_184318.jpg (3.9 MiB) Viewed 2571 times
-
- FB_IMG_1741755038710.jpg (110.41 KiB) Viewed 2571 times
-
- IMG_20250313_092434.jpg (5.16 MiB) Viewed 2571 times
- Kyle146
- Posts: 2
- Joined: 3 months ago
Re: My 1982 Nissan Maxima Diesel Wagon
IP belt was in great shape for approximate "70k miles". It even had the original part number which tells me It has never been changed. Tensioner looked brand new as well, but I still replaced it with one from Amayama from a LD20. (It took them a week to even find one)
I also replaced the water pump since it had a leak from the weep hole. It was also factory. but sadly I had to replace it with a L28 pump instead of the LD28 pump. I will include the measurement difference I found between the pumps below.
I notice that it creeps slightly warmer with high load or AC on ( I know AC! and factory R12 too) but nothing I would be worried about yet. I also installed 8 inch pusher fans on the condenser since I live in Texas.
My balancer is wobbling so I found a guy parting out a LD who sold me the starter and balancer for 100$. His motor was at 80k before the oil pan got dragged and it ran dry (his car was lowered). I plan to buy his IP pump as well as a spare. The previous owner told me he ran the IP dry twice which scares the crap outta me. But it doesn't smoke TOO bad.
I also replaced the water pump since it had a leak from the weep hole. It was also factory. but sadly I had to replace it with a L28 pump instead of the LD28 pump. I will include the measurement difference I found between the pumps below.
I notice that it creeps slightly warmer with high load or AC on ( I know AC! and factory R12 too) but nothing I would be worried about yet. I also installed 8 inch pusher fans on the condenser since I live in Texas.
My balancer is wobbling so I found a guy parting out a LD who sold me the starter and balancer for 100$. His motor was at 80k before the oil pan got dragged and it ran dry (his car was lowered). I plan to buy his IP pump as well as a spare. The previous owner told me he ran the IP dry twice which scares the crap outta me. But it doesn't smoke TOO bad.
- Attachments
-
- IMG_20250326_195504_569.jpg (525.1 KiB) Viewed 2569 times
-
- IMG_20250326_174135.jpg (3.79 MiB) Viewed 2569 times
Re: My 1982 Nissan Maxima Diesel Wagon
Very nice car, you're lucky that you live in TX and have vehicles that are in such good shape!
Steve
Steve
97 Jetta TDI, 90 Passat wagon TDI
05 E320 CDI, 92 300SD
gir - won't the sploding hurt?
zim - silence!
05 E320 CDI, 92 300SD
gir - won't the sploding hurt?
zim - silence!
Who is online
Users browsing this forum: No registered users and 1 guest